Model:WS-RTLS-RFID
Model:TRW-SX1278 1W
Model:WS-UWBPDT
Model:WS-CAR900 (室內款Indoor)WS-CAR3DET (室外款Outdoor)
Model:WS-RADAR10G
Products
Application
About us
Contact us
Agent
WENSHING Electronics will release the RADAR10GATDUL (Doppler) 32meters long-distance radar human movement detection module series in December 2022. RADAR10GATDUL is the legal ISM band of 10.525GHz.
The infrared probe of the passive PIR pyroelectric sensor is emitted by detecting the body temperature. The disadvantage is that it is easily interfered by various heat sources and light sources, and the penetration is poor. Environmental conditions, and the distance is short, only 2-3 meters.
Radar detection cannot achieve energy-saving functions due to its power consumption, and the detection distance is not far away, and the installation density and quantity are too large, resulting in high cost.
WENSHING Electronics has improved the problems of PIR misjudgment and short distance, overcomes the shortcomings of radar power consumption, and saves user costs. It has developed RADAR10GATDUL, which has an ultra-low operating voltage of 2.1V and an ultra-low current of 98uA. It only needs 0.0002W power consumption for normal detection, up to 32 meters to detect ultra-long distance.
Data Sheet Revision History
FEATURES
DC Electrical Characteristics
Specification
Min.
Typ.
Max.
Frequency Range
10.2
10.525
10.7
GHz
IF Frequency Range
1
40
Hz
Transmit power
-20
-3
dBm
Supply Voltage, VDD
2.1
5.5
V
98
uA
RADAR10GATDUL-X-XX LIST
Model
LDO/LED Function
RADAR10GATDUL-1-XX
LDO 3.3V, with LED light (standard)
RADAR10GATDUL-2-XX
LDO 3.3V, no LED signal
RADAR10GATDUL-3-XX
No LDO, no lights
RADAR10GATDUL-5-XX
With light sensor LDO 3.3V, with LED light (standard)
RADAR10GATDUL-6-XX
With light sensor LDO 3.3V, without LED light signal
RADAR10GATDUL-7-XX
With light sensor LDO, no light signal
Hardware trigger delay options:
Tigger off-delay time
RADAR10GATDUL-X-01
The trigger is HI, and it is LOW after 1 second (standard)
RADAR10GATDUL-X-15
The trigger is HI, LOW after 15 seconds
RADAR10GATDUL-X-30
The trigger is HI, LOW after 30 seconds
RADAR10GATDUL-X-60
The trigger is HI, LOW after 60 seconds
DIMENSIONS
PIN ASSIGNMENT
Pin
Name
Function
Description
VDD
POWER
Power Supply 2.1~5.5V
2
IF
O
IF Export
3
ENABLE
I
Control LDO HI actions
4
SDA
I/O
I2c communication interface
5
INT
There is a trigger output HI when moving
6
SCL
7
GND
Power GND
8
VCC
Internal LDO output 3.3V
PCB accessories
Antenna direction
The smaller the angle, the lower the chance of false action triggering.
APPLICATIONS