Wireless Audio core Module is a highly integrated digital core module. By meaning of the Intelligent Wireless technology is developed by Syncomm. It can provide high quality wireless audio for the users. Supporting multiple interfaces such as I2S, USB, embedded RF IC and other key blocks such as I2C control interface, voltage detector. IA2E wireless audio module provides dual transmitter and receiver modes, which enables the seamless transmission of high quality audio. In the transmitter, Tx receives digitized stereo as input, which is packetized and processed for synchronization and data integrity. After that, the data are modulated and radiated at 2.4 GHz ISM band. In the receiver, Rx receives RF signal, demodulated and processed to restore the transmitted signal, and then streamed as digital audio output.
Output Power 0.5W
Worldwide 2.4 GHz ISM band operation by 2406 MHz ~ 2472MHz.
Up to 2 Mbps RF data rate
Long distance > 30m (Line of sight)
RF frequency hopping in 34 channels
Embedded Up/MAC mode settings IA2E RF normal operation mode that support 15 hopping channel/Per Sequence. It is included 4 Sequence group/per system.
According FHSS specification protocol.
Audio Quality and Interface
Support Compressed audio
Analog output: THD+N up to -70dB, SNR up to 85dB.
Support I2S (Audio In/Out) and USB (Tx Audio Input) with 2 channels downstream.
Support I2S downstream 32/44.1/48KHz at resolution of 16 bits (2 channels).
IA2E wireless audio module that support in master mode for Tx and Rx audio interface.
Control Channel (CCH) up to 2 kbps for downstream by I2C interface via wireless.
USB 1.1 device controller, Supports LPCM and compressed format at 16-bit 2-channels at sampling frequency of 32, 44.1, and 48KHz downstream.
Programmable audio latency 20ms/50ms(default: ~40ms)
Integrated pipelined 8-bit CPU, with embedded 4K bytes program RAM, with embedded RFIC in IA2E audio processor.
Serial 4K byte EEPROM for Boot Register ***.I2C interface support blank EEPROM code download, External I2C device read/write, and data.
Tx Charging Features (Option)
Support Rechargeable "AAA" size Ni-MH battery for 900mAH to 1000mAH capacity by Tx module internal charging circuit and firmware control