Model:WS-RADAR SW-10G
Model:WS-UWBPDT
Model:RD232-H-RS232-925MRD232-H-RS485-925MRD232-H-USB-925MRD232-H-TTL-925M
Model:WS-RTLS RFID
Model:WS-CAR 3DET
Products
Application
About us
Contact us
Agent
The UHF RFID four directional all-in-one reader has excellent read-write capability, greatly improves the read rate, and meets the ISO18000-6C (EPC G2) or ISO-18000-6B standard. Support POE power supply, containing 3 relay to control an input detection point, containing full color LED color reminders, including buzz sound control. The UHF RFID Reader is used in the control of factories entrances, construction sites entrances, and vehicles management. With the abilities of data reading, filtering, transmitting, and connecting with the control system, it provides effective entrance control. The ability of automatic identification can be flexibly applied to the control of workers and vehicles passing. Workers’ ID can be efficiently identified by automatic identification system in a short time, and it will show light and sound in order to inform the workers immediately, and can greatly increase the level of safety. It can control the identity of visiting vehicle by building up an automatic identification gate. The passing vehicle will be recognized by RFID reader at the gate of entrance. The system can immediately and precisely confirm the identity of incoming vehicle and enhance the safety of parking lots.
INTERFACE
Specification
APPEARANCE
External Appearance
FEATURES
SPECIFICATION
Technical specifications
3 seconds can receive 150 Tag
Induction range 100M region (diameter)
Induction range and sensitivity
Active triggering in the field
Sensor
Motion Sensor
IR Detect Sensor
Switch On/Off
Temperature detection
Low voltage warning
Archival structure can bear a large amount of data access.
File structure description data can be defined at any time to input Reader and format.
It can bear more than 10000 Reader access.
The daily storage processing data can exceed 10G byte Log.
Complete API access planning reduces the difficulty of program development.
The complete RFID Middleware API Specification.
Item
Active Reader
Wristband Active Tag
Card Hold Active Tag
Asset Active Tag
RFID KEY
Multi-Tag Read Capability
Yes
Functionality
Wakes up tags
Modulation
GFSK
PSK
Frequency
925~928MHz
868MHz/902~928MHz
Data Rate
9.6~36K bps
9.6~550K bps
Transfer Mode
Duplex
Transfer Setup
Setup by user
Read Range(maximum)
100M
Host Communications
RS485
RF Power Output
-45dBm~+10dBm
-20dBm~+10dBm
Sensitivity
-96dBm~-108dBm
-96dBm~-105dBm
Power
12Vdc,60Ma
CR-2032 OR CR-2025
Case Material
ABS (Acrylonitrile Butadiene Styrene)
ABS ( Acrylonitrile Butadiene Styrene )
Temperature
Operating
-15C to +60C(-31F to +122F)
-35C to +50C(-31F to +122F)
Storage
-40C to +85C(-40F to +122F)
-40C to +85C(-40F to +186F)
Humidity
100% Non-condensing
101% Non-condensing
Indicators
LED on whiletransmitting packet to tag.
Interface
RF: Internal Antenna / Digital :RS485
EMI
10V/m 0.1~1000MHz AM electromagnetic wave
10V/m 0.1~1001MHz AM electromagnetic wave
Mounting
Super RFID mounting kit
Battery Life
1~3 years depending on use (tag has low battery detection)
Use Memory
512 bit
Free Drop
1M concrete floor, twice per sid
Product Dimension
47×32×11mm
89×57×70mm
43×30×11mm
33×65×11mm
IR detect
Alarms if tag removed from person,Asset
Alarms if tag exceeds predefined limits
Micro Switch
On/Off Sensor
Buzzer
Beep when called, Low Battery
Shock
Response time(100ms)
IR’Micro Switch, State Switch detect response time
Detect response